E Type Series
One family page covers both common low-voltage LED furniture systems.
Select wattage to match LED strip, spot and multi-light cabinet loads.
Constant-voltage design with flicker-free performance stated on product datasheets.
Short circuit, open circuit and overload protection for project reliability.
| SKU | 12E24-24V | Model | 12E24 |
|---|---|---|---|
| Max Load | 24W | Total Wattage | 30W |
| Input Voltage | 220-240V~ | Frequency | 50/60Hz |
| Output Voltage | 24Vdc | Output Current | 1.0A |
| IP Rating | IP20 | Safety Class | Class II |
| Input Cable | 2m input cable with Euro plug | Output | 6-port distribution box |
| Dimensions | 100x43x21 mm | Dimming | No built-in dimming |
| Flicker Free | Yes | Protection | Short circuit, open circuit, overload |
| Certifications | CE / UKCA / RoHS / REACH | Driver Type | Constant Voltage |
CE, UKCA, RoHS and REACH compliant Class II constant-voltage LED driver (IP20). EMC references: EN IEC 55015, EN IEC 61547, EN IEC 61000-3-2 and EN 61000-3-3 as listed on product datasheets.
E Type LED Driver is suitable for LED strips, under-cabinet lights, wardrobe lights and low-voltage furniture lighting systems that need compact constant-voltage power.
Typical use: kitchen cabinets, wardrobes, display furniture | Output: 12Vdc or 24Vdc
Choose wattage with adequate headroom for the total LED load. Final installation must follow local electrical rules and cable sizing.
Independent furniture mounting is recommended for project supply.
3D CAD files are available for approved distributors and project partners.
Request 3D CAD AccessThis page covers 6W, 12W, 24W, 36W, 48W and 60W models with 12V or 24V constant-voltage output.
Datasheets specify IP20 for the E Type LED Driver series. It is intended for indoor dry furniture and cabinet applications, not wet-zone bathroom use.
Yes. Product datasheets and legacy product pages list Flicker Free performance for this series.
Datasheets state no built-in dimming. External low-voltage dimming options must be confirmed per project.
Sum the LED load and select a driver with suitable headroom. Match output voltage (12V or 24V) to the luminaires, then request a quote with the selected SKU.
