IR Switch & Controller · IR024W
The NewThingLine IR024W IR sensor switch controls 12/24Vdc LED lighting in wardrobes, cabinets and other furniture. Its single Ø8 mm recessed head senses door movement across a 0–8 cm range, while the controller provides smooth fade on/off switching. Specify it for a single-door LED lighting circuit and confirm the power supply, connectors and total LED load before installation.
Hands-free door sensing turns cabinet LED lights on and off without a wall switch.
Drill an 8 mm hole for the mini sensor head; surface-mount clip is optional.
Short-range IR sensing suits wardrobe and cabinet door gaps.
Pair with a suitably rated distributor box to feed compatible LED products.
| SKU | IR024W | Category | Switch and Controller |
|---|---|---|---|
| Model | IR Sensor-1 Head | Sensor heads | 1 |
| Controller size | 73 × 14.6 × 7.2 mm | Finish | Black / White / Silver grey |
| Voltage | 12/24 Vdc | Working current | 3A max |
| IP Rating | IP20 | Safety class | Class III (SELV) |
| Detection range | 0–8 cm | Recess hole | Ø8 mm / depth 10 mm |
| Mounting | Recess (surface optional) | Control | IR on/off with fade |
| Input wire | 1 m | Output wire | 1 m |
| Installation | Wardrobe / cabinet / furniture LED | Warranty | 3 years |
| Certifications | CE / UKCA / RoHS | Notes | Match 12/24Vdc LED load and connector family |
CE, UKCA, Class III (SELV), and RoHS compliant for low-voltage switch and controller applications (IP20).
Controller dimensions are listed in the technical specifications. Confirm cut-out details against the datasheet before production.
IR Sensor-1 Head (IR024W) adds automatic on/off sensing for wardrobe, entrance cabinet and wine-cabinet LED circuits when a door opens or closes.
Use case: Door open → light on | Pairing: 12/24Vdc LED power supply + distributor box
Ask NewThingLine for wiring diagrams and compatible distributors when specifying multi-door furniture.
3D CAD files are available for approved distributors and project partners.
Request 3D CAD AccessThe primary code on this page is IR024W. Confirm finish colour and packing when requesting a quote.
IR024W is specified for 12/24 Vdc with up to 3A working current. Always match the LED load and power-supply rating before installation.
The recess sensor head needs an Ø8 mm hole (about 10 mm depth). Surface-mount installation is optional with a clip.
Use the Downloads section on this page for the IR024W product datasheet. Dimension details are also shown in the Dimension Drawing section.
IR024W is listed with CE, UKCA, Class III (SELV) and RoHS. Standard warranty is typically 3 years unless a project agreement states otherwise.
